User Manual
6
OPERATION PROCEDURES:
1.
Unpack the package and take out the attached documents and spare parts
such as the water inlet and outlet tubes, ice shovel and gaskets, etc.
2.
Position the ice maker on a well ventilated place and leave at least 150mm
room between the ice maker and the wall. Be sure the ice maker is positioned
levelly and away from the heat source.
3.
Make one end of the φ12 flexible plastic corrugated pipe (supplied with the
maker) connected with the water outlet tube on back of the maker, another
pipe end should be placed in a container for surplus water (prepared by user
himself) or in the sewer.
4.
Make one end of the water inlet tube (supplied with the maker) connected
with the 3/4" screw type connector of the water tap so as to get the drinkable
tap water. The water pressure of water supply pipe is 1.5
～
3 bar. The other
end of the water inlet tube should be connected with the screw type
connector of water valve on the back of the ice maker. Be sure to put gaskets
(supplied with the maker) in both ends of the water inlet tube before
connecting. If it is an ice maker for purified water, a φ 12 corrugated pipe
(supplied with the maker) should be used. Connect one end of the pipe with
the purified water supplier (desk-top water dispenser) and another end with
water valve connector on the back of the ice maker. The desk-top water
dispenser should be placed on the ice maker at the back position.
5.
Make poser connection and press on the start button on the operation board
for about 4 seconds till the run indicator and the big ice indicator (or small ice
indicator) light on. Then the maker begins to work. All the procedures, water
inlet→ice making→crush ice→ice dropping→ice storing, are controlled
automatically for ice making continuously. If ice is full in the ice storage
container, the ice full indicator on the operation board will light on and the
ice maker will stop automatically. If there is a water shortage or something
wrong with the water supply system, the Water shortage indicator will light
on and the ice maker will stop operation automatically.
