CAPACITIVE TOUCH SERIES
OPERATION INSTRUCTION
ON-OFF VALVE /COMPRESSOR CONTROL
Thermostat acquires the room temperature via its
integrated sensor and maintains the set-point by
simple on-off output.
POWER ON OR OFF
By pressing POWER button
INCREASE / DECREASE
In the ON state, press UP or
DOWN to increase or decrease
the setting parameters.
FAN OPERATION
Fan can be selected as manual or automatic 3-speed operation. In manual
mode, the fan will be switched to the selected speed via control output
Gh,Gm,Gl (by pressing FAN button ). In automatic mode, the fan speed will
set-point. When room temperature reaches set-point, valve will be closed and
changed to low speed instead of turning OFF via ISU mode)"
HEAT/COOL/VENT
Pressing the MODE button to select heat
cool or ventilation mode.
TEMPERATURE DISPLAY
Both the room temperature and the set-point
are displayed.
COMFORT MODE
In the comfort mode, the set point can be
changed by pressing UP or DOWN buttons.
and manual heat/cool changeover.
KEY LOCK
The default status of “Key lock” is all keys available and it can be changed in
ISU mode. Key lock function includes the following settings: All keys are
available (Default) Mode button is locked out. Fan and Mode button are
locked out. All buttons are locked.
ENERGY SAVING MODE
By pressing MODE button for 3 seconds can activate the energy saving mode with icon appearing on the screen. If energy saving
is activated by button pressed, pressing POWER button will stop energy saving mode. For heating mode, if energy saving function is
enabled, the set-point will be changed to remote setback heating set-point. The range of remote setback heating set-point is from 10 °C
to 21 °C and default value is 18 °C. The value can be changed in ISU mode with step of 1 °C . For cooling mode, if energy saving function
is enabled, the set-point will be changed to remote setback cooling set-point. The range of remote setback cooling set-point is from 22°C
to 32°C and default value is 26 °C. The value can be changed in ISU mode with step of 1 °C .
FREEZE PROTECTION MODE
Freeze protection can be disable(default) or
enabled via ISU mode. If freeze protection is
enabled( it is not available in cooling only
application) and thermostat is in OFF mode while
the room temperature is below 6 °C , the
thermostat will open heating device before the
temperature rises to 8 °C
TIME SETTING
In ON/OFF states, press and for 5 seconds, the time area will
be flashing, press to select minutes, hours or week, then press or
to adjust the relevant time, press to confirm.
TO SELECT MANUAL AND PROGRAMMABLE
In the thermostat ON status, Press and hold and for more than 5
seconds, the icon of or will be flashing, press to select
manual or programmable and press to confirm.
ADJUSTING OF WEEKLY PROGRAMMABLE
After selected programmable mode, press for more than 5 seconds enter into program schedule setting then press to
select setting item of periods, time and temp. Press or to adjust the relevant value, press to confirm. The program
schedule is a weekly (7days) cycle, it can be selected for 5+2 days, 6+1 days or 7 days. 5+2 is 5 workdays plus 2 days holiday a week,
6+1 is for 6 workdays plus 1 day holiday a week, 7 is for 7 workdays a week. There’s 6 periods for workdays and 2 periods for
holidays.
Setting sequence when enter program setting
Workdays 1st period time adjusting -> temperature adjusting -> 2nd period time adjusting -> temperature adjusting……6th period time
adjusting -> temperature adjusting -> holidays 1st period time adjusting -> temperature adjusting -> 2nd period time adjusting ->
temperature adjusting
3
