Trueshopping BC2602D, Assembly & Owners Manual, Page: 22 / 198

•
Using the provided tool, place the
socket over the spark plug and firmly
strike the screwdriver rod with the palm
of your hand in an anti - clockwise
direction to loosen the plug, then
unscrew the rest of the way to remove.
•
At this point, if you are exchanging the
plug, discard the old one and pick up a
new plug. Remove the dust shield by
pulling it off the spark plug cover and
push the plug into the rubber cover cap
ensuring it goes all the way in.
• To check for a spark, the tip of the plug
must touch a metallic surface. The
easiest method is to push it against the
metal area on the engine next to where
the plug normally sits.
•
Finally, position the switch to the “I
“setting on the throttle control.
• With the plug held against a metal
surface ( and ensuring that you are
hold ing the rubber plug cover to avoid
electric shock
) pull the recoil starter
while observing the gap between the
electrode and the earth contact for a
spark . (
fig 1)
20