15 INCH TRUE ICE
TM
MACHINE INSTALL GUIDE
TEC_TM_073 | REV. D | EN
12/03/2021
Page 45 of 56
INCORRECT.
Spray bar positioned with clean-out caps on the left.
INCORRECT.
Spray bar is not fully seated or level.
CORRECT.
Spray bar is fully seated, level, and positioned with the clean-
out caps on the right..
SPR AY BAR
The spray bar, located in the water trough, supplies
water to the individual ice cube cups.
REMOVAL
Carefully pull the spray bar from the water supply hose.
INSTALLATION
To be correctly installed, the spray bar must–
• Be positioned with the clean-out caps on the right.
• Sit fully seated and horizontally level.
PUMP CLE AN-OUT CAP
REMOVAL
1. Remove the pump clamp. See fig. 1.
2. Pull the clean-out cap down.
INSTALLATION
1. Slide the clean-out cap over the hole beneath
the pump.
2. Reinstall the pump cap clamp.
FIG. 1.
Pump cap and clamp locations.
Pump cap
Clamp
Summary of Contents for TUI-15-R/L-OP-B
