11052019
14
TRUE NORTH TREESTANDS R
ISE
LADDERSTAND ASSEMBLY
Figure 16
Assemble the Two Standing
Platforms Together
Figure 17
Secure Standing Platforms
Figure 18
Install Standing Platform Onto
Top Ladder Section Brackets
Figure 19
Install Seat Posts
Figure 20
Install Seat Back Braces
Figure 21
Install V-Bar (Make certain
the seat back braces are INSIDE of v-bar)
NOTE: All hardware should be left loose while assembling the ladderstand unless otherwise noted.
STEP 1: Locate the standing two (2) standing platforms. Slide the two (2) standing platforms together as shown in Figure 16.
Secure the two (2) standing platforms using two (2) ¼ x 2 ¼” bolts, four (4) steel washers and two (2) locknuts as shown in
Figure 17. Be certain the two expanded metal treads match and are facing the same direction as shown in Figure 17. Tighten these
bolts now.
STEP 2: Locate the two (2) top ladder section brackets. Install these onto the assembled standing platform using two (2) ¼ x 2 ¼”
bolts, four (4) steel washer and two (2) locknuts as shown on Figure 18.
STEP 3: Locate the two (2) seat posts. Install the seat posts onto the top ladder section brackets using two (2) ¼ x 1 ¼” bolts, four
(4) steel washers and two (2) locknuts as shown in Figure 19. ASSEMBLY TIP: Insert the bolts from the INSIDE to the OUTSIDE. This
will preclude you catching your clothing on the bolt ends while hunting.
STEP 4: Locate the two (2) seat back braces. Install the seat back braces onto the rear standing platform using two (2) ¼ x 2 ¼”
bolts, four (4) steel washers and two (2) locknuts as shown in Figure 20.
STEP 5: Install the assembled seat back brackets onto the rear of the standing platform using two (2) ¼ x 2 ¼” bolt, four (4) steel
washers and two (2) locknuts as shown in Figure 21. NOTE: The angled portion of the seat back bracket should face rearward as
shown in Figure 21.
STEP 6: Locate the v-bar. Install the v-bar by sliding it into the seat posts as shown in Figure 21. NOTE: The seat back brackets MUST
be positioned on the INSIDE of the v-bar as shown in Figure 21.
Seat Back Braces
INSIDE Front of V-Bar
