CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
24
TREADMILL ASSEMBLY STEPS (continued):
Step 1
3
Rear Foot Leveling:
a)
Ensure treadmill incline rack
wheels and rear feet are resting on
the floor and not on cardboard,
packaging, etc.
b)
Using a 15/16 inch open
end wrench, loosen nut A on
Right Rear Foot (only side
adjustable).
c)
Using a level or estimating by sight,
turn section B of foot clockwise, or
counter-clockwise, using a 7/8 inch open
end wrench to level the rear of treadmill.
d)
Tighten nut A until it is secured against
bottom of treadmill.
Note: The recommended gap between (A)
and (B) is 1/4" on a flat floor.
