CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
15
TREADMILL ASSEMBLY STEPS (continued):
Step 3 Frame Cable Connections:
a) Route the cables exiting from the right pedestal to
the appropriate connection point as shown. Cables
will be marked for easy identification.
b) Remove the nut and washer attached to the coaxial
cable as shown.
c) Pass the front of the coaxial cable through the hole
in the electrical panel and reinstall the washer and nut
on the coaxial cable.
Note: Fig. 3-1 is how the frame cable connections
appear coming out of the shipping box. Fig. 3-1
illustrates the frame cable connections for the Emerge
(LED) and 9" TFT consoles. Fig. 3-2 illustrates the
frame cable connections for the Transcend and 15"
TFT consoles. Note the different auxiliary power
supply connection points between the two pictures
based on the console used.
Note: The assembly instructions for securing the 12V
power adapter to the motor pan and the
corresponding cable connections can be found on
pgs. 33-35 for the Transcend
16
console and pgs. 40-42
for the Escalate
15
console.
Fig. 3-1
Fig. 3-2
