4
Initial set-up information
•
Gently remove the model from the carrier case and remove the protective foam placed
under the manikin head
•
Secure the manikin to a suitable surface by adjusting the screw on the suction cups
(surface must be non-porous to ensure sufficient suction)
•
Loosen the neck locks to provide easier head movement if required. Re-tighten the neck
lock again once the head is in the desired position
•
Check the volume of air in the tongue is sufficient, it can be inflated or deflated by a
syringe to adjust the difficulty during intubation if desired
•
Please ensure two lung bags and one stomach bag are attached to the airway and
oesophagus respectively
•
Spray generous amounts of lubrication provided with the model (TL001) on the airway
and equipment prior to use
List of procedures facilitated by the AirSim Bronchi
•
Diagnostic bronchoscopy
•
Lung isolation techniques using left and right endo-bronchial tubes and bronchial
blockers
•
Lung suctioning techniques
•
Single naso-tracheal intubation
•
Bag valve mask (BVM) ventilation techniques
•
Full range of supraglottic devices
•
Direct laryngoscopy
•
Endotracheal tube insertion
•
Awake fibre optic examination
•
Single lung isolation techniques
•
Combi tube insertion
Care and maintenance
Store in clean, dry conditions away from heat and direct sunlight; avoid contact with metals,
solvents, oils or greases and strong detergents. When the product is not in use please store
in the black carrier case provided.
Thoroughly wash the AirSim airway in warm water. Please use warm soapy water or
something similar until all visible foreign matter and residue is removed.
Summary of Contents for AirSim Bronchi
Page 6: ...6 ...
