Tru-Turf R52-ELTac, Manual

Page: 53 / 58

TRU-TURF R52-ELT
AC
Golf Greens Roller Manual 50
Battery Watering System
Installing E7118 Pro-Fill Kit
(Battery Watering System & bracket)
1. Disconnect the battery positive terminal from the
battery.
2. Remove all battery caps.
3. Place Pro-Kit manifolds into the battery holes and lock
fi rmly into place.
4. Before cutting any tubes lay out the Pro-Fill tubes on
the batteries as shown below. Ensure there is no kinks in
the tube.
5. Undo the battery nut at point 5. Place the plastic
bracket on top of the stainless steel battery bracket.
Ensure the hose connecting end of the coupling is facing
towards the front of the roller. Do nut up fi rm, do not over
tighten the bracket.
6. Use zip ties to secure tubing as shown.
Topping up battery water (to be done on a regular basis)
1. Using the hose/fi lter to tap arrangement, connect one
end to a tap and the other end to the battery fi lling point.
Turn on the tap and watch the red balls in the in-line
container rotate, once the balls have stopped rotating the
battery water level is correct. Disconnect the hose and
recharge the batteries if necessary. Never charge the
batteries if they are low in water, permanent damage to
the batteries will occur.
2. Using the hand bulb fi lling arrangement, place the pickup
tube into a container of distilled water, connect the outlet
fi tting to the battery fi lling point. Squeeze the bulb until it
becomes tight to squeeze when this occurs the water level
in the batteries is correct. Disconnect the fi lling device and
charge the batteries if necessary as per instructions in “A”.
1
2
4
5
Connect fi lling hose here
3
6