TractionAir
12
Tee Mounting Between Wheels
TA37004
Tee shown assembled -
Note can be 45° elbows (TAAG450407)
Option 1
Option 2
Option 3
Use with round
chassis pole
90 ° elbow
45 ° elbow
Chassis line Tee out to tyres
note rubber hose sheathe
Feed hose Tee Block between wheels TA37004
Nylon Tube
The nylon tube is for plumbing from the truck’s air system to the inlet side of
the pressure cell, and then from the pressure cell to the tee between the tyres
(TA37006). This tee needs to be fitted inside the chassis between the centre
of the Drive Axles. The tube then runs from the Tee piece (TA37006) out to the
outer bracket mount, where the special Tee block Part No TA37004 is fitted to
take the external wheel hoses. Air brake hose has been supplied to protect the
Nylon tube where it leaves the inner chassis and goes
to the centre tee block (noted above) between the Drive
Tyres. Cut the tube to length and insert into the Brake
hose by using the natural lay of both to assist.
Summary of Contents for TractionAir
Page 27: ...TractionAir 27...
