TROY XCD MAN-EXT2000, Administrator'S Manual

Page: 56 / 252

4-10 TCP/IP Network Configuration
- Select Printers.
- Select Configure.
- Select Add.
- Enter the name of the print queue you entered in
the
/etc/printcap
file as the Printer name,
- Enter anything as the Comment, and Class name.
- For the Use printer interface select "Existing".
- Press the F3 key to get a list of available interfaces,
and select the desired one as the Name of interface
using the arrow keys and Enter key ("Dumb” is a
good choice).
- Select "Direct" as the Connection.
- Enter the desired Device name (
/dev/lp
generally
works).
- Select "Hardwired" as the Device.
- Select "No" for the Require banner field.
Other Non-Standard Configurations
With DEC TCP/IP Services for VMS (UCX), you
first need to put a name for the TROY XCD print
server in the
H O S T S
file using the command
S E T
H O S T n a m e / ADDRESS=ipaddress
at the
UCX>
prompt, where name is the desired name for the
print server and ipaddress is the IP address for the print
server. Then use the
sys$system:ucx$lprsetup
command to add a printer (print queue). Enter the
desired printer name, and then use the TROY XCD
print server name as the remote system name. Specify
one of the TROY XCD print server services (see
beginning of this section for options) as the remote
system printer name (accept the defaults for other
questions).