_______________________________________________________
10-2
Banyan VINES Network Configuration
•
Type in the maximum number of jobs and maximum size of job for the
queue at the
Configure Queue
screen. Or press
F10
for unlimited
number and size.
•
If desired choose a default paper format at
the Configure Paper
Formats
screen, otherwise press
F10
to select the default settings.
•
If desired enter the authorized user names at the
Access Lists
screen, or
press
F10
for the defaults.
•
At the
Add a Destination
screen, select
PCPrint
and press
ENTER
.
•
At the
Destination Attributes
screen, enter the StreetTalk name of the
print server. Press
F10
.
•
At the
Output Strings
screen, press
F10
to accept the output string values.
•
At the
Enable Strings
screen, press
F10
to select the defaults.
•
Select “NO” in response to the message “Would you like to add
another destination at this time?”
•
At the
Print Queue Status
screen, change both values to “Yes” to
enable the print queue to accept and print jobs. Press
F10
.
•
Press
ESCAPE
multiple times to exit the
Manage
utility.
Print Server Configuration
1. Install the XAdmin software from the CD-ROM provided with the
print server.
Note:
Use XAdmin, not XAdmin32, when configuring a VINES-only
network. You can use XAdmin32 on a VINES network only if the PC
is running TCP/IP and both the PC and print server have valid IP
addresses.
5. Double-click on the XAdmin icon to start the program under Windows.
6. The print server will show up as “_
xxxxxx
_P1” where “
xxxxxxx
” is the
last six digits of the Ethernet address.
7. Click on the
Configure
button.
8. Click on the
Banyan
tab.
9. If necessary change the hop count (default hop count is 2).
10. Enter the StreetTalk name of the print server, this
must
exactly match
the StreetTalk name of the user that was created using the
Manage
Users
utility.
11. Click on the
Services
tab.
12. Select the desired service to be configured, (default is BINARY_P1).
13. Enter the StreetTalk name of the queue created using the
Manage
Services
utility.
14. Click on
OK
, and then
OK
again to save the configuration.
15. Click
OK
and
OK
again to exit XAdmin.
