TROY Group PPS-8 Page 25 Quick Install Manual Download

Page: 25 / 62

_____________________________________________________________

Management 3-1

Management Methods

TROY offers a wide variety of ways to configure and monitor the print
server. These methods are:

TROY XAdmin32

•

A 32-bit graphical utility

•

Compatible with Windows NT 4.xx and Windows 95/98 running
TCP/IP or IPX/SPX Protocols

•

Included on CD-ROM

•

Can be downloaded from our web site (

http://www.troy.com

)

•

Default password is

ACCESS

Note

Troy recommends using the Novell 32-bit client software on the

PC workstation that is used for configuring the print server in order to
take full advantage of the capabilities of XAdmin32.

TROY XAdmin

3. A 16-bit graphical utility
4. Compatible with Windows 3.1 and Windows 95 running IPX/SPX

or Banyan VINES protocols

5. Included on CD-ROM
6. Can be downloaded from our web site (

http://www.troy.com

TROY WebXAdmin

4. Allows the user to configure the print server with a standard web

browser like Netscape Navigator or Microsoft Internet Explorer.

5. Can be used on any operating system that supports web browser

capabilities

6. Both print server and PC must be configured with an IP address in

order to use WebXAdmin (see chapter 4 for information on setting
the IP address).

TROY Print Server Console

1.  A command-line oriented console
1.  Contains features not available through XAdmin or WebXAdmin
1.  Default password is

ACCESS

1. Can be accessed via:

Summary of Contents for PPS-8































































Search results

Summary of Contents for PPS-8

Reviews:

Related manuals for PPS-8

Brands by name

Popular brands

TROY Group PPS-8, Quick Install Manual

Search results

Summary of Contents for PPS-8

Reviews:

Related manuals for PPS-8

Brands by name

Popular brands