manualshive.com logo in svg

TROY Group PPS-8, Quick Install Manual, Page: 5 / 62

Share
Download
TROY Group PPS-8 Quick Install Manual Download Page 5

_____________________________________________________________ 

Introduction 1-1

 

1 

 

Introduction 

 

This manual is specifically for quick installation of your print server with 
TROY recommended procedures. For more detailed configuration 
instructions (including non-standard configurations), please refer to the 
TROY Administrator’s guides located on the CD-ROM supplied with your 
print server or on the TROY  web site (

http://www.troygroup.com

). 

 
 
External Print Server Models 

 
The TROY  Print Server family includes the following models: 
 

• 

The

 Pony Print Server

 is the industry's smallest full-featured external 

print server.  It plugs directly into the parallel port of the printer, and 
supports a 10baseT Ethernet interface. It is available in the following 
models: 

 

 

PPS-8S 

IPX/SPX, TCP/IP, AppleTalk, DLC/LLC, 
NetBEUI/NetBIOS IP, Direct Mode IPX/IP, 
http 

 
PPS-8 

IPX/SPX, TCP/IP, AppleTalk, DLC/LLC, 
NetBEUI/NetBIOS IP, Direct Mode IPX/IP, 
LAT, IP, http 

 
PPS-8N 

IPX/SPX, TCP/IP, AppleTalk, DLC/LLC, 
NetBEUI/NetBIOS IP, Direct Mode IPX/IP, 
LAT, VINES IP, http

 

 

• 

The

 Pony 100

 is a high-performance compact print server that plugs 

directly into the parallel port of the printer.  It supports both 
100baseTX Fast Ethernet and 10baseT Ethernet, with the type of 
network automatically sensed. A serial port is also included.  It is 
available in the following models: 

 

 

PPS100-8S IPX/SPX, 

TCP/IP, AppleTalk, DLC/LLC, 

NetBEUI/NetBIOS IP, Direct Mode IPX/IP, 
http 

 

Summary of Contents for PPS-8































































Reviews:

No comments