Washer (4x8mm)
Washer (4x8mm)
Washer (4x8mm)
Screw (4x35mm)
Screw (4x25mm)
Nut (4mm)
Spring Washer (4mm)
4mm
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x650mm)
Set Screw (2mm)
Washer (2mm)
Linkage Stopper
1
1
1
1
Washer (4x8mm)
4
Set Screw (3x4mm)
The side sketch map of the engine installation finished.
Drill 4 holes and set blind nut in appropriate position
in the firewall before install the engine.
Install the engine carefully.
Assemble the accelerator push rod to the engine.
Engine installation finished sketch map.
162 mm
5.2mm
Blind Nut
Blind Nut (4mm) 4
Fuel supply line
Fuel spray line
Air pressure line
Assembly of the fuel tank.
27
28
29
30
32
6
31
Elevator servo
Rudder servo
The sketch map of the linkages for the rudder
and elevator in the fuselage.
2
1
wheel (90mm)
TP Screw(3x20mm)
4
2
Steel wire (0.5x1500mm)
2
Lock Nut (4mm )
Bushing (8X4mm)
2
2
Clevis
Copper joiner
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
Rod (2x300mm)
1
1
Retainer
1
1
Air tank
Switch
Note:rubber wheels oleo struts
and retracts are optional.
Assemble the wheel and oleo strut to
the retract as illustration.
Assemble the retract to the fuselage with
TP Screw as illustration.
Assemble the steel wire to the nose arm.
Collar (5mm)
2
1
Wheel (75 mm)
1
Steering fullarm (60x6mm)
2
Washer(4x8mm)
2
Screw (4x25mm)
1
Aluminum shaft(5x50mm)
Brass collar (5mm)
Brass collar (5mm)
Wheel (75 mm)
Aluminum shaft
Screw (4x25mm)
Screw (4x25mm)
Washer(4x8mm)
Washer(4x8mm)
Steering fullarm (60x6mm)
1.8mm
TP Screw(3x20mm)
4
TP Screw(3x20mm)
Clevis
1
Install the rudder servo to appropriate position
in the fuselage.
56
55
59
60
11
58
Accessory list for the coming installation steps.
