A = A '
A`
A
Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Securely glue together.If coming off during flights,
you'll lose control of your airplane which leads
to accidents!
1.8mm
TP Screw (3x20mm)
8
Washer (3x6mm)
8
TP Screw (3x20mm)
Washer (3x6mm)
According to the rib template drill holes to another
main wing.
6mm
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
Wood dowel (6x30mm)
Rib template (2mm ply)
2
Wood dowel (6x30mm)
1
Rib template (2mm ply)
Main wing joiner
1
Main wing joiner
6mm
Rib template (2mm ply)
30mm
210mm
100mm
R10mm
R10mm
For air tube
For servo wire
Trim holes in the appropriate position in the wings
and drag the servo wire and the air tube out.
The sketch map when the main wing
assembled completely.
Epoxy the wheel house to the wings carefully.
Note:Please fix the air tube before
assemble the wheel house to the wing.
Assemble the landing gear to the wheel house.
17
18
20
21
4
16
19
Cut the surplus shaded portion carefully
off the canopy and exhaust .
Epoxy plies to relevant position inside the fuselage as
below for assembling the cowling.
Epoxy plies inside the fuselage under the cowing and
mount the canopy with TP screw as illustration.
TP Screw (2.3x8mm)
TP Screw (2.3x8mm)
1.5mm
6
TP Screw (2.3x8mm)
Ply (15x15x3mm)
6
1.5mm
8
TP Screw (2.3x8mm)
Ply (15x15x3mm)
8
2
Pvc part
2
Wooden Block(24x20x12mm)
2
Wooden Block(24x15x12mm)
2
7
Collar (5mm)
Wheel (100mm)
Wooden supporter
(41.5x28x26mm)
Landing gear(5mm)
2
1
12
TP Screw (3x20mm )
Landing gear straps
2
Gear door
2
1
Landing gear(5mm)
1
Wheel (90mm)
Wooden supporter
(46x28x14mm)
1
4
TP Screw (2.3x12mm)
1
Aluminum part(60x6mm)
TP Screw (3x20mm)
Wooden Block
TP Screw (3x20mm)
Collar (5mm)
Wooden supporter
Collar (5mm)
Washer (3x6mm)
Assemble the wheel and gear door to landing gear.
Epoxy the exhaust to appropriate position in the
fuselage as illustration.
69
65
13
67
66
68
Accessory list for the coming installation steps.
