8
Pin hinge(24x24mm)
Flap
1mm
Make sure they are in
the right position while
installing.
Trailing
edge
8
8
2
2
2
4
2
2
2
2
Clevis
Rod (2x300mm)
Retainer
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Pin hinge(24x24mm)
Screw (3x30mm)
Washer(3x15mm)
2
Washer(3x15mm)
Lock Nut (3mm )
TP Screw (2.3x12mm)
1.5mm
3mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
8
TP Screw (2.3x12mm)
Rod (2x300mm)
Clevis
Washer(3x15mm)
Washer
Lock Nut (3mm )
Screw (3x40mm)
Screw (2x10mm)
Secure the servo.Install the nylon control horn
and connect the linkage.
Epoxy the pin hinges to the flap.
Keep some space about 1mm width between
trailing edge and flap.
Install the servo as the illustration below
Epoxy the flaps to the wings as illustration.
7
6
8
9
10
2
Accessory list for the coming installation steps.
150mm
The centre of the Gravity.
15
76
