Clevis
Retainer
Rod (2x300mm)
Screw (2x10mm)
8
8
2
2
2
2
2
2
Clevis
Rod (2x300mm)
Retainer
TP Screw (2.3x12mm)
Pin hinge(24x24mm)
Screw (3x40mm)
Washer(3x15mm)
2
Washer(3x15mm)
Lock Nut (3mm )
8
Pin hinge(24x24mm)
Make sure hinges are
mounted in the same line.
1mm
Aileron
Tailing
edge
Make sure they are in
the right position while
installing.
Keep about 1mm width space between aileron
and trailing edge.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Fix the aileron servo to the serve tray with epoxy.
Install the nylon control horn and connect the linkage.
Apply instant type CA glue to appropriate position of
aileron and pin hinge.
Apply instand type CA glue to appropriate position of
trailing edge and pin hinge.
1
2
3
4
5
1
Accessory list for the coming installation steps.
