background image

MANUFACTURER’S LIMITED WARRANTY FOR

GDOC-100166 REV. A

The limited warranty set forth below is given by Troy-Bilt LLC with 

respect to new merchandise purchased and used in the United 

States and/or its territories and possessions, and by MTD Products 

Limited with respect to new merchandise purchased and used 

in Canada and/or its territories and possessions (either entity 

respectively, “Troy-Bilt”).
This warranty is in addition to any applicable emissions warranty 

provided with your product.
“Troy-Bilt” warrants this product (excluding its 

Normal Wear Parts

 

and 

Attachments

 as described below) against defects in material 

and workmanship for a period of two (2) years commencing 

on the date of original purchase and will, at its option, repair or 

replace, free of charge, any part found to be defective in materials 

or workmanship. This limited warranty shall only apply if this 

product has been operated and maintained in accordance with 

the Operator’s Manual furnished with the product, and has not 

been subject to misuse, abuse, commercial use, neglect, accident, 

improper maintenance, alteration, vandalism, theft, fire, water, 

or damage because of other peril or natural disaster. Damage 

resulting from the installation or use of any part, accessory or 

attachment not approved by Troy-Bilt for use with the product(s) 

covered by this manual will void your warranty as to any resulting 

damage.

Normal Wear Parts

 are warranted to be free from defects in material 

and workmanship for a period of thirty (30) days from the date of 

purchase. Normal wear parts include, but are not limited to items 

such as: batteries, belts, blades, blade adapters, tines, grass bags, 

wheels, rider deck wheels, seats, snow thrower skid shoes, friction 

wheels, shave plates, auger spiral rubber and tires.

Attachments

 — Troy-Bilt warrants attachments for this product 

against defects in material and workmanship for a period of one 

(1) year, commencing on the date of the attachment’s original 

purchase or lease. Attachments include, but are not limited to items 

such as:  grass collectors and mulch kits.

HOW TO OBTAIN SERVICE: 

Warranty service is available, WITH 

PROOF OF PURCHASE, through your local authorized service dealer. 

To locate the dealer in your area:

In the U.S.A.

Check your Yellow Pages, or contact Troy-Bilt LLC at P.O. Box 361131, 

Cleveland, Ohio 44136-0019, or call 1-866-840-6483,  

1-330-558-7220 or log on to our Web site at www.troybilt.com.

In Canada

Contact MTD Products Limited, Kitchener, ON N2G 4J1, or call 

1-800-668-1238 or log on to our Web site at www.mtdcanada.com.
This limited warranty does 

not

 provide coverage in the following 

cases:
a. 

Log splitter pumps, valves, and cylinders have a separate 

one- year warranty.

b. 

Routine maintenance items such as lubricants, filters, blade 

sharpening, tune-ups, brake adjustments, clutch adjustments, 

deck adjustments, and normal deterioration of the exterior 

finish due to use or exposure.

c. 

Service completed by someone other than an authorized 

service dealer.

d. 

Troy-Bilt does not extend any warranty for products sold or 

exported outside of the United States and/or Canada, and 

their respective possessions and territories, except those sold 

through Troy-Bilt’s authorized channels of export distribution.

e. 

Replacement parts that are not genuine Troy-Bilt parts.

f. 

Transportation charges and service calls.

g. 

Troy-Bilt does not warrant this product for commercial use.

No implied warranty, including any implied warranty of 

merchantability or fitness for a particular purpose, applies 

after the applicable period of express written warranty above 

as to the parts as identified. No other express warranty, 

whether written or oral, except as mentioned above, given 

by any person or entity, including a dealer or retailer, with 

respect to any product, shall bind Troy-Bilt. During the period 

of the warranty, the exclusive remedy is repair or replacement 

of the product as set forth above.
The provisions as set forth in this warranty provide the sole 

and exclusive remedy arising from the sale. Troy-Bilt shall 

not be liable for incidental or consequential loss or damage 

including, without limitation, expenses incurred for substitute 

or replacement lawn care services or for rental expenses to 

temporarily replace a warranted product.

Some states do not allow the exclusion or limitation of incidental 

or consequential damages, or limitations on how long an implied 

warranty lasts, so the above exclusions or limitations may not apply 

to you.
In no event shall recovery of any kind be greater than the amount 

of the purchase price of the product sold. 

Alteration of safety 

features of the product shall void this warranty. 

You assume the 

risk and liability for loss, damage, or injury to you and your property 

and/or to others and their property arising out of the misuse or 

inability to use the product.
This limited warranty shall not extend to anyone other than the 

original purchaser or to the person for whom it was purchased as a 

gift.

HOW STATE LAW RELATES TO THIS WARRANTY: 

 This limited 

warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state.

IMPORTANT:

  Owner must present Original Proof of Purchase to 

obtain warranty coverage.

Troy-Bilt LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019; Phone: 1-866-840-6483, 1-330-558-7220 

MTD Canada Limited - KITCHENER, ON N2G 4J1; Phone 1-800-668-1238

Summary of Contents for 2890

























Reviews: