background image

2

Finding and Recording Model Number

Please do 

NOT return the unit to the retailer from which it was  

purchased, without first contacting Customer Support.

Table of Contents

BEFORE YOU START ASSEMBLING  
YOUR NEW EQUIPMENT, 
please locate the model plate on the equipment and copy 
the information to the sample model plate provided to the 
right. You can locate the model plate by standing behind the 
unit and looking down at the frame below the engine. This 
information will be necessary to use the manufacturer’s web 
site and/or obtain assistance from the Customer Support 
Department or an authorized service dealer.

This Operator’s Manual is an important part of your new chipper shredder. It will help you assemble, pre-

pare and maintain the unit for best performance. Please read and understand what it says.

 

Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this 
unit, you can seek help from the experts. Choose from the options below:
1.  Visit 

mtdproducts.com

. Click on the Service & Support menu option. 

2. Phone a 

Customer Support Representative

 at 1 (800) 520-5520.

3. The 

engine manufacturer

 is responsible for all engine-related issues with regards to performance, power-rating, specifica-

tions, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual, packed separately with 

your unit, for more information. 

 

Customer Support .............................................. 2
Safety Labels ...................................................... 3
Safe Operation Practices ................................... 4
Setting Up Your Chipper Shredder .................... 6
Operating Your Chipper Shredder ..................... 8

Maintaining Your Chipper Shredder ................ 10
Troubleshooting ................................................ 12
Parts List ........................................................... 14
Warranty ............................................ Back Cover

www.troybilt.com

TROY-BILT  LLC

P. O. BOX

  

361131

CLEVELAND, OH 44136

1-800-520-5520

330-558-7220

Summary of Contents for 24A-424G766

















Reviews: