background image

8

4

Operating 

Your Chipper 

Shredder

WARNING: The operation of any 
chipper shredder can result in 
foreign objects being thrown into the 
eyes, which can damage your eyes 
severely. Always wear the safety 
glasses provided with this unit or eye 
shields before chipping or shredding 
and while performing any adjustments 
or repairs.

Gas and Oil Fill-Up 

Service the engine with gasoline and oil as instructed in 
the separate engine manual packed with your chipper 
shredder. Read instructions carefully.

WARNING: Never fill fuel tank indoors 
with engine running or until the engine 
has been allowed to cool for at least 
two minutes after running.

Starting Engine

1.  Attach spark plug wire to spark plug. Make certain 

the metal cap on the end of the spark plug is 
fastened securely over metal tip on the spark plug.

2.  Open fuel shut-off valve ( Model 

424).

3.  Move choke control lever to 

CHOKE position. See Figure 5.

NOTE

: A warm engine may not require choking.

4.  Move throttle control lever to FAST (rabbit) position 

(Model 414) or push rocker switch to ON (Model 
424). See Figure 5.

5.  Grasp starter handle and pull rope out slowly until 

engine reaches start of compression cycle (rope will 
pull slightly harder at this point).

NOTE

: A “clanking” noise may be heard when pulling 

the starter rope. It is completely normal and does NOT 
indicate a malfunction of any kind.

6.  Pull rope with a rapid, continuous, full arm stroke. 

Keep a firm grip on starter handle. Let rope rewind 
slowly.

7.  Repeat the previous steps until engine starts. When 

engine starts, move choke control gradually to RUN 
position until the engine is running smoothly. 

WARNING: Never run the engine 
indoors or in a poorly ventilated area. 
Engine exhaust contains carbon 
monoxide, an odorless and deadly 
gas.

Stopping Engine 

1.  Move throttle control lever to STOP position (Model 

414) or push rocker switch to OFF (Model 424). See 
Figure 6.

NOTE

: See your engine manual packed with your unit for 

more detailed instructions.

CAUTION

: Never stop the engine by 

moving the choke lever into the CHOKE 
position. Backfire, fire or engine damage 
could result.

WARNING

The operation of any 
chipper shredder 
can result in foreign 
objects being thrown. 
Always wear the safety 
glasses provided with 
this unit or eye shields 
before chipping or 
shredding and while 
performing any adjust-
ments or repairs. 

Never fill fuel tank 
indoors with engine 
running or until the 
engine has been 
allowed to cool for 
at least two minutes 
after running.

Never run the engine 
indoors or in a poorly 
ventilated area. En-
gine exhaust contains 
carbon monoxide, an 
odorless and deadly 
gas.
Never stop the engine 
by moving the choke 
lever into the CHOKE 
position. Backfire, 
fire or engine damage 
could result.

����

����

Figure 6

Figure 5

Summary of Contents for 24A-424G766

















Reviews: