Troxler Enhanced RoadReader Plus 3451, Manual Of Operation And Instruction

Page: 103 / 247

5–18
ENABLE A TARGET VALUE
To enable a target value stored in memory, press the
〈
Enable
〉
button on the
Target Menu
(see Figure 5–15). The PDA displays
the target value selector menu, as shown in Figure 5–17. To enable
a target value, press the file name twice. The PDA displays a
confirmation message. Press the
〈
ok
〉
button to return to the
Proctor Value Menu .
DISABLE THE TARGET VALUE
To disable the target value, press the
〈
Disable
〉
button on the
Proctor Value Menu
(see Figure 5–15). The PDA requests
confirmation that the target value is to be disabled. Press the
〈
No
〉
button to return to the Proctor Value Menu without disabling the
target value.
Press the
〈
Yes
〉
button to disable the target value. The PDA disables
the target value and displays a confirmation message. Press the
〈
ok
〉
button to return to the
Proctor Value Menu
.
NOTE
The 3451 gauge can be used with the target value
disabled. In this case, however, no percent compaction
value will be displayed.