background image

Design changes r

eserved · All rights r

eserved

© Gebrüder T

rox GmbH (10/2000)

Order Code

Order Details

8

Description

Smoke detector (smoke detection using optical light scattering
principle) with general building supervision approval from the
Institut für Bautechnik Berlin, for fire dampers with electric 
or electric/ pneumatic control device (voltage off to operate),
suitable for protection against smoke transmission in air
conditioning systems, even with cold smoke t 

 

72 °C;

suitable for air velocities of 1 m/s to 20 m/s.
With additional functions for monitoring the air flow in the
measurement area of the smoke alarm, the pollution level 
on the smoke alarm sampling chamber and the system
electronics (maintenance once/year).

Scope of supply: see page 2.

Order Example

Make:

TROX                      

Type:

RM-O-VS       

Quantity: 5                      

RM-O-VS

Order Code

Description:

Diagnostic instrument for smoke detector RM-O-VS to scan
pollution level. 
Measurement range 0 – 100 units; hand unit with 1m long
connection lead and plug; battery supply 9 V.

Order example

Make:

TROX                      

Type:

D-RM-O-VS 

Quantity: 1                      

D-RM-O-VS

Order Code

Description:

Remote control terminal for smoke detector RM-O-VS for
surface mounting or panel mounting (size 48 x 96 x 63) with
signal LEDs for alarm, air flow, pollution and system
monitoring; socket connection for diagnostic instrument 
D-RM-O-VS and pushbutton for test/reset function.

Order Example

Make:

TROX                              

Type:

T-RM-O-VS or T-RM-O-VS/1

Quantity: 5                     

T-RM-O-VS

or

T-RM-O-VS/1

Summary of Contents for RM-O-VS









Reviews: