EM-LON Operating Manual / Leaflet no. M375EV4 (3/2013)
10
6
Installation
For installation, wiring, and commissioning
observe the recognised technical regulations,
especially safety and accident prevention
regulations.
For any wiring work follow the national and
local regulations and guidelines for electrical
installation.
Installation
The expansion module is to be fitted into the casing
of a TCU3 controller or TAM adapter module.
Step 1
Screw the four distance pieces 1 into the
corresponding openings in the TCU3 or TAM
main PCB and tighten them (hand-tight only).
Step 2
Take the pin header 2 and push it from below
through the EM-LON PCB 3 just far enough such
that the pins protrude slightly on the upper side.
Danger!
Danger of electric shock! Do not touch any
live components! Electrical equipment
carries a dangerous electrical voltage
during operation.
• Only skilled qualified electricians are
allowed to work on the electrical system.
• Switch off the power supply before
working on any electrical equipment.
Important!
Danger of injury from the metal pins of the
pin header.
Wear electrician gloves for protection.
1
2
3
