8
EN
videoscope VSC206
Aligning / moving the camera
Info
Please note that the surface of the netting at the probe
exterior may fray over time depending on the
mechanical stress (e.g. when in contact with sharp-
edged objects). This does not constitute a defect of the
device but normal wear and tear, which cannot be
avoided.
1. Use the joystick (14) to move the camera (4) in the desired
direction.
Taking a picture
ü
The device is in camera mode.
1. Press the Photo/OK button (7).
ð
The picture is taken.
Recording a video
It is possible to take pictures at the same time while you are
recording a video.
Video recording is not interrupted.
1. Press the video button (12) to record a video.
ð
The recording is started.
ð
During recording, the recording symbol (21) is displayed
in the top left of the display.
2. Press the video button (12) again.
ð
The recording is stopped.
Viewing recordings
1. Press the Play button (11).
ð
The videoscope switches to picture view and video
view.
2. Press the Up/Down button (17).
ð
The different recordings will be displayed on the screen.
ð
Press the Photo/OK button (7) to play a video or, if
necessary, to pause, or to view the pictures.
3. Press the Zoom button (13) to enlarge the picture.
ð
2-, 3- or 4- fold zoom is possible by pressing the Zoom
button (13) several times.
4. Press the video button (12).
ð
The picture view is stopped.
ð
The videoscope switches back to recoding mode.
Deleting pictures or videos
1. Press the Play button (11).
ð
The videoscope switches to picture view.
2. Press the Up/Down button (17) or the brightness button
(15) until the desired recording is displayed.
3. Press the Menu button (16).
ð
The submenu for deleting (
Delete file
) will be displayed.
4. Select the desired setting:
ð
Select
Yes
to delete the file.
ð
Select
Delete all file
to delete all files.
ð
Select
No
to cancel the process.
5. Confirm the selection by pressing the Photo/OK button (7).
ð
The selected action is executed.
