EN
3
videoscope VSC206
Residual risks
Warning of electrical voltage
Electric shock due to contact with live parts! Do not
touch any live parts. Secure neighbouring live parts by
covering them or by switching them off.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of explosive substances
Do not expose the battery to temperatures above 60°C!
Do not let the battery come into contact with water or
fire! Avoid direct sunlight and moisture. There is a risk
of explosion!
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Caution
Keep a sufficient distance from heat sources.
Note
To prevent damages to the device, do not expose it to
extreme temperatures, extreme humidity or moisture.
Note
To prevent water damages to the device, please
observe the different types of protection of the housing
and the gooseneck probe.
The housing is splash-proof (IP54), the gooseneck
probe can be immersed in water (IP67, 1 m / 30 min).
Note
Using the device continuously over several hours
causes an increased heat generation in the LEDs in the
probe tip. To increase the lifetime of both the LEDs and
the imaging sensor we recommend allowing the device
to cool down at ambient temperatures for at least 10 to
15 minutes with the power switched off after a long
period of use.
Note
Do not use abrasive cleaners or solvents to clean the
device.
