2
EN
videoscope VSC206
Table of contents
Notes regarding the operating manual................................. 2
Safety ..................................................................................... 2
Information about the device................................................ 4
Transport and storage........................................................... 7
Operation ............................................................................... 7
Software................................................................................. 9
Errors and faults.................................................................. 13
Maintenance and repair ...................................................... 13
Disposal ............................................................................... 13
Notes regarding the operating manual
Symbols
Warning of electrical voltage
This symbol indicates dangers to the life and health of
persons due to electrical voltage.
Warning
This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.
Caution
This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.
Note
This signal word indicates important information (e.g.
material damage), but does not indicate hazards.
Info
Information marked with this symbol helps you to carry
out your tasks quickly and safely.
Follow the manual
Information marked with this symbol indicates that the
operating manual must be observed.
You can download the current version of the operating manual
and the EU declaration of conformity via the following link:
VSC206
https://hub.trotec.com/?id=41280
Safety
Read this manual carefully before starting or using the
device. Always store the manual in the immediate vicinity
of the device or its site of use.
•
Do not use the device in potentially explosive rooms or
areas and do not install it there.
•
Do not use the device in aggressive atmosphere.
•
Do not use the device in atmospheres containing oil,
sulphur, chlorine or salt.
•
Protect the device from permanent direct sunlight.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Do not open the device.
•
Observe the storage and operating conditions (see
Technical data).
Intended use
Only use the device for the visualization of objects.
To use the device for its intended use, only use accessories and
spare parts which have been approved by Trotec.
Foreseeable misuse
Do not use the device in potentially explosive areas. Never use
the device on persons or animals. Trotec accepts no liability for
damages resulting from improper use. In such a case, any
warranty claims will be voided. Any unauthorised modifications,
alterations or structural changes to the device are forbidden.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
