8
EN
high-performance air purifier TAC ECO II
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
The device does not start:
•
Check the power connection.
•
Check the power cable and mains plug for damage.
•
Check the on-site fusing.
•
Wait for 10 minutes before restarting the device. The fan
motor may be overheated and must cool down. If the
device is not starting, have the electrics checked by a
specialist company or by Trotec.
The device is loud or vibrates:
•
Check whether the device is set up in a stable and upright
position.
The device gets very warm, is loud or is losing
performance:
•
Check the air inlets and air filters for dirt. Remove external
dirt.
•
From the outside, check the device for dirt (see chapter
Maintenance). If the inside of the device is dirty, have it
cleaned by a specialist company or by Trotec.
The device still does not operate correctly after these
checks:
Please contact the customer service. If necessary, bring the
device to an authorised specialist electrical company or to
Trotec for repair.
Maintenance
The device is designed for long hours of operation with
minimum maintenance effort. Safe operation of the device
requires all built-in components to be checked and cleaned
after 12 months at the latest or after 4000 operating hours as
well as all damaged components to be replaced.
In order to benefit from an optimal operation of the air cleaner
we recommend using our maintenance service once a year.
The maintenance service consists of changing the filter,
cleaning and disinfecting the interior and exterior of the device
and checking functions and all safety devices. This way you
ensure your device to maintain a perfectly clean condition while
reliably filtering viruses and aerosols from the room air for many
ongoing years – without you needing to worry about it anymore.
We'll get in touch with you regarding your service intervals. For
an all-round safe operation, we recommend concluding a
maintenance agreement. Please contact our customer service.
Note
All service activities other than those specified in the
maintenance table may only be performed by a specialist
company authorized by Trotec.