6
EN
high-performance air purifier TAC ECO II
Assembly and installation
Scope of delivery
•
1 x device
•
1 x Air filter prefilter G4 Z line
•
1 x HEPA filter
•
1 x Manual
Start-up
When positioning the device, observe the minimum distance
from walls or other objects as described in the chapter
Technical annex.
A
B
C
C
D
•
The device may only be used in environments with no
excessive formation of dust.
•
Set the device up in an upright and stable position.
•
Position the device on even and stable and ground in a
way to prevent it from tipping over.
•
When setting up the device, ensure a sufficient distance
for air inlet and outlet as well as for operation (see
Technical data).
•
Make sure that extension cables are completely unrolled.
•
When positioning the device, keep a sufficient distance to
heat sources.
•
Make sure that no curtains or other objects interfere with
the air flow.
Inserting the air filter
Note
Do not operate the device without an air filter inserted
into the air inlet!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
•
Make sure that the air filter is installed before switching
the device on.
Connecting the power cable
•
Insert the mains plug into a properly fused mains socket.
Operation
Operating elements
9
10
11
12
No. Designation
Meaning
9
On/off
switch
Switching the device on or off;
Is illuminated when the device is
switched on
10 Filter indicator light 1 Indicator light for prefilter
11 Filter indicator light 2 Indicator light for H14 HEPA filter
12 Operating switch
Adjusting the fan stage