36
EN
850W pendulum action jigsaw PJSS 10-230V
2.
Push the base plate lock (
14
) to the front.
14
3.
Slide the base plate (
6
) to the rear until it can
be freely rotated.
4.
Set the desired cutting angle. The number of
degrees to be set is engraved on the base
plate (
6
).
5.
Slide the base plate (
6
) back to the front until
the toothing engages.
6.
Push the base plate lock (
14
) to the rear.
7.
Check the base plate (
6
) for tight fit.
Info
The anti-splinter guard and the
protective cover cannot be used for mitre
cuts.
Summary of Contents for PJSS 10-230V
Page 67: ......
