background image

20

EN

air cooler PAE 31

Technical annex

Technical data

Parameter

Value

Model

PAE 31

Evaporation capacity

1100 ml/h

Air flow rate

1000 m³/h

Mains connection

220-240 V / 50 Hz

Nominal current consumption 0.3 A

Power consumption

60 W

Sound pressure level (1 m
distance)

55 dB(A)

Water tank capacity

6 l

Weight

5.5 kg

Dimensions (length x width x
height)

265 x 310 x 620 mm

Minimum distance to walls and
other objects:

top (A):

rear (B):

sides (C):

front (D):

100 cm
100 cm
100 cm
100 cm

Remote control batteries

Type CR 2032

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. You can also find out about other return options
that apply for many EU countries on the website 
https://hub.trotec.com/?id=45090. Otherwise, please contact an
official recycling centre for electronic and electrical equipment
authorised for your country.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Summary of Contents for PAE 31






















Reviews: