EN
11
air cooler PAE 31
Swing function
The swing function can be switched on in any operating mode if
required.
The air flaps rotate automatically if the swing function is
switched on, thus providing a continuous air circulation.
1. Press the
swing
button (
21
) to switch the swing function
on or off.
Memory function
If you switch the device back on from standby mode, the
settings selected for the operating mode and swing function are
saved. Any activated timer will not be saved in the device.
Refilling water
An empty water tank is indicated by the device with a prompt.
The
air cooling
LED (
18
) flashes for 5 seconds. In this case, the
water tank must be refilled.
The device requires fresh drinking water for air cooling:
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Info
If possible, change the water every 3 days to prevent
bacterial growth.
Note
Fill the device with fresh drinking water only. The
water temperature must not exceed 40 °C.
•
Put the ice packs into a freezer for at least 4 hours before
use.
•
Put the ice packs into the water tank before filling water
into the tank.
Info
When using ice packs at high outside temperatures,
condensation may form at the water tank and drip onto
the floor.
1. Disconnect the device from the mains before refilling water
or putting ice packs into the device.
2. Release the water tank (
7
) by turning both clips from their
vertical position into the horizontal position.
3. Remove the water tank (
7
) from the device.
7
4. If required, put the ice packs into the water tank for
additional cooling.
