10
EN
local air conditioner PAC 2010 E / PAC 2610 E
Connecting the exhaust air hose
1. Assemble the two-part flat nozzle by pushing the top
connection piece onto the bottom one until they click into
place.
2. Screw the flat nozzle onto one end of the exhaust air hose
in the direction of the arrow.
3. Screw the hose adapter onto the other end of the exhaust
air hose in the direction of the arrow.
4. Insert the hose adapter with exhaust air hose into the air
conditioner's exhaust air hose connection. The side
labelled
TOP
must face upwards.
Discharging exhaust air
•
The exhaust air coming from the device contains waste
heat from the room to be cooled. For this reason it is
recommended to discharge the exhaust air to the outside.
•
The end of the exhaust air hose can be fed through the
open window. If required, secure the open window with
the corresponding means, so that the end of the exhaust
air hose cannot shift.
•
The end of the exhaust air hose can also be hooked into a
tilted window.
For this purpose, we recommend using a window seal
(optional).
•
Install the exhaust air hose inclined with the air direction.
•
The connected hose must not contain any source of
ignition.
Example with exhaust air hose:
