background image

4

EN

radiant heater IR 2000 C / IRS 2010

Foreseeable misuse

The device is not intended for industrial use.

Do not place any objects, e.g. clothing, on the device.

Do not use the device for heating in vehicles.

Do not use this device in the vicinity of fuel, solvents,
varnishes or other easily inflammable vapours or in rooms
where these substances are stored.

The device may not be used as a heating device for
babies / children or animals.

Do not install the heating device in immediate proximity to
swimming pools!

The device may not be exposed to moisture or weather
effects (rain, sunlight).

Any use other than the intended use is regarded as a
reasonably foreseeable misuse.

Any unauthorised changes, modifications or alterations to the
device are forbidden.

Personnel qualifications

People who use this device must:

be aware of the dangers that occur when working with
electric devices in damp areas.

have read and understood the operating manual, especially
the Safety chapter.

Maintenance tasks which require the housing to be opened
must only be carried out by specialist electrical companies or by
Trotec.

Symbols on the device

Symbols

Meaning

This symbol located on the device indicates that it
is prohibited to place objects (such as towels,
clothes etc.) above or directly in front of the
device.
In order to avoid overheating and fire hazards, the
heater must not be covered.

Residual risks

Warning of electrical voltage

Work on the electrical components must only be
carried out by an authorised specialist company!

Warning of electrical voltage

Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.

Warning of electrical voltage

Risk of electric shock!
Risk of an electric shock if the heating device comes
into contact with water in swimming pools!
Do not install the heating device in immediate
proximity to swimming pools!

Warning of hot surface

Parts of this appliance can become very hot and cause
burns. Particular attention is to be paid when there are
children or vulnerable persons present!

Warning

Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!

Warning

The device is not a toy and does not belong in the
hands of children.

Warning

Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.

Warning

Improper installation entails a risk of fire.
Do not place the device on combustible ground.
Do not place the device on high-pile carpets.

Warning

Risk of injury due to infrared radiation!
Do not stay in the device's immediate vicinity for too
long. Do not look directly into the device for too long.
Observe the minimum distances.

Warning

In order to avoid overheating and fire hazards, the
device must not be covered!

Summary of Contents for IR 2000 C















Reviews: