8
EN
radiant heater IR 2000 C / IRS 2010
Assembly of the IRS 2010
1. Set the foot (
6
) up in an upright position.
2. Connect the three component parts of the telescopic
rod (
5
) with the foot (
6
) as shown by tightening them.
6
5
3. Connect the plug of the power cable to the socket of the
radiant heater.
ð
Fix the plug of the power cable.
4. Guide the mains cable from above through the mounted
rod and foot.
5. Place the radiant heater on the tube and fix it
using 2 screws.
6. Adjust the radiant heater to the desired height and fix the
telescopic rod with twist lock (
5
).
7. Carefully tilt the device.
