Operating manual – IDS 65 D
EN
B-3
Type IDS 65 D
Parameter
Value
Height
860 mm
Weight
58 kg
1)
indicates the temperature increase. T + ambient temperature = exhaust air
temperature
2)
optional
Fuels
The following fuels have been approved for use with the oil heating unit
IDS 65 D: heating oil EL, diesel
7. Proper and improper use
Proper use
The oil heating unit IDS 65 has been developed for the generation of hot
air and may be used indoors and in roofed outdoor areas.
The device can be used for heating well ventilated rooms such as cow-
sheds or winter construction sites and for deicing machines or pipelines.
Any application deviating from the above-mentioned use is deemed in-
admissible!
Improper use
The device may not be installed or operated in potentially inflammable
and explosive rooms or areas.
The device may not be used in rooms with an insufficient supply of com-
bustion air.
8. Installation conditions
When choosing the installation location of the oil heating unit, a number
of spatial and technical conditions must be taken into account. Any non-
compliance may impair the functioning of the device and/or of the acces-
sories or result in hazardous situations for people and property.
The following points are to be observed during installation:
The device may be operated indoors and in roofed outdoor areas.
The device must be installed in a stable position and placed on
a fireproof surface.
The device must be connected to a properly secured mains
socket.
The installation room of the device must be sufficiently ventilated.
The minimum distance of the device to inflammable materials
must be at least 2 m.
The intake and exhaust openings must not be covered.
There must be no walls or large objects near the device.
A sufficient number of fire-extinguishers must be available.
9. Description of device
The oil heating unit IDS 65 D consists of the following components:
Oil heating unit
1
2
3
4
5
6
7
9
10
12
11
8
1 Combustion chamber
7 Fan
2 Burner
8 Heating oil filter
3 Nozzle
9 Heating oil circuit
4 Solenoid valve
10 Support/handle
5 Pump
11 Wheel
6 Motor
12 Tank
Control panel
1
2
3
4
5
1 Reset button with indicator lamp
4 Lamp
2 Selector switch
5 Power supply cable
(continuous operation/thermostat operation)
3 Thermostat socket
10. Installation and commissioning
Check that the scope of delivery of your oil heating unit is com-
plete. If an accessory part is missing, please contact the Trotec
customer service or the specialist dealer from whom you pur-
chased the device.
Check the oil heating unit and its connection parts for possible
damages.
Mount the support/the handle and the wheels to the oil heating
unit. Please refer to the supplied assembly instruction manual
for further information. Please use the supplied assembly tools.
Make sure to comply with the requirements described in the
chapter "Installation conditions".
Fill the heating oil into the tank with the device switched off and
cooled down.