9
Prevent Malfunction
Read on to learn about preventing malfunctions of the IR camera
Avoid damaging the detector of the IR camera
Warning:
Do not aim the IR camera directly into the sun or at other
intense heat source which could damage the detector of the IR
camera.
Avoid Condensation Related Problems
Moving the IR camera rapidly between hot and cold temperatures may
cause condensation (water droplets) on its external and internal
surfaces.
You can avoid this by placing the IR camera in the plastic case (bundle)
and letting it adjust to temperature changes slowly before removing it
from the case.
If Condensation Forms Inside the IR Camera
Stop using the camera immediately if you detect condensation.
Continued use may damage the IR camera. Remove the power cord,
and battery or a household power source, from the IR camera and wait
until moisture evaporates completely before resuming use.
Extended Storage
When not using the IR camera for extended periods of time, remove the
battery from the IR camera or battery charger and store the IR camera in
a safe place. Storing the IR camera for extended periods with battery the
installed will run down the battery.
Right Reserved
TROTEC reserves the right to change the functions and configurations
of our products without prior notice.
