4
EN
air washer AW 20 S
Information about the device
Description of the device
The device is a 3-in-1 combination device for air purification,
humidification and odour elimination.
The device reduces both odours and electrostatic charges and
leaves neither limescale nor wet spots.
It comes equipped with a replaceable prefilter for coarse dirt
such as animal hair, fluff and house dust. Additionally a
HEPA filter can activated on demand to reduce bacteria and
mould growth.
With a humidification performance of up to 750 ml per hour and
an air flow rate of up to 228 m³ per hour the device is suitable
for rooms sized up to 55 m² or 138 m³.
The water tank has a capacity of approx. 9 litres and comes
equipped with a filling level indication. If the water tank is
empty, a warning signal will be emitted and the device switches
off automatically.
In sensor-controlled automatic operation an intelligent sensor
measures the air quality and humidity level. A three-stage light
signal indicates the air quality in the room. The relative humidity
is also indicated.
All in all, you can select nine different operating modes. What is
more, a plasma generator can be activated on demand.
Apart from using the device in automatic mode you can also
manually select one of the three fan stages.
The device operates at a low noise level of < 55 dB.
Furthermore, the device comes with a night mode enabling
ultra-silent operation at bedtime.
Device depiction
1
2
3
4
5
9
8
6
10
11
7
No.
Designation
1
Upper part
2
Control panel
3
Water level indicator
4
Cleaning brush
5
SecoSan
®
Stick 10 (optional accessory)
6
Bottom section
7
Disk
8
HEPA filter
9
Pre-filter
10
Air inlet with pre-filter flap
11
Air outlet
