EN
7
air cleaner AirgoClean® 11 E
Operation
Note
Avoid open doors and windows.
Control panel
12
6
8
13
9
11
7
10
14
No.
Designation
Meaning
6
Filter change
LED Illuminated when the filter needs to be
changed
7
Ionization
LED
Illuminated when the
ionization
function is activated
8
Fan speed
LED
Selected fan speed indication:
stage 1 = low
stage 2 = medium
stage 3 = high
= automatic mode
9
Speed
button
Setting fan speed and automatic
mode
Reset
function: Only press the button
for more than 2 seconds if the filter
change LED (6) lights up and the filter
has been changed
10
Ionization
button Switching ionization on or off
11
On/off
button
Switching the device on or off
12
Timer
button
Switching on the timer function: 1 h,
2 h, 4 h, 8 h
13
Hours
LED
Indication of the number of hours of
the activated
timer :
1 h, 2 h, 4 h and
8 h
14
Air quality
LED
Is illuminated according to the air
quality:
green = good
blue = medium
red = poor
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
Afterwards, only the
on/off
key (11) lights up and the device is in
standby mode.
1. Press the
on/off
(11) button to switch the device on.
ð
The
fan speed
LED (14) lights up. Before initial start-up,
the device starts in its second fan stage.
ð
The
air quality
LED (14) lights up accordingly to the air
quality.
If no operational input is made for 40 seconds, the brightness of
the control panel decreases. The full brightness will be restored
the next time you make an entry.
Setting the operating mode:
The device has the following operating modes:
•
Ventilation
•
Automatic mode
Ventilation
In
ventilation
mode, you can select all 3 fan speeds manually.
Please proceed as follows to select the fan stages:
ü
The device is switched on.
1. Select the desired speed by pressing the
fan
speed
button (9).
ð
The
fan speed
LED (8) of stage 1, 2 or 3 is illuminated.
