12
EN
air cleaner AirgoClean® 11 E
2. Take the used HEPA carbon filter (17) out of the device.
17
3. Dispose of the used HEPA carbon filter according to the
national regulations.
4. Take the new HEPA carbon filter out of the plastic cover.
5. Insert the new HEPA carbon filter (17) into the device.
17
6. Reassemble the bottom plate (16) and the device by
turning the bottom plate in the
Close
direction of the arrow.
Make sure that the two arrows of the marking (18) are
positioned exactly on top of each other.
16
18
Proceed as follows to reset the
filter change
LED (6).
ü
The device is now in standby mode.
1. Press the
fan speed
button (9) for more than 2 seconds.
2. Press the
on/off
(11)button to switch the device back on.
