background image

6

EN

oil-filled radiator TRH 25 E / TRH 26 E

Transport and storage

Note

If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.

Transport

To make the device easier to transport, it is fitted with wheels.
To make the device easier to transport, it is fitted with a carry
handle.

Before

 transporting the device, observe the following:

Switch the device off.

Hold onto the mains plug while pulling the power cable out
of the mains socket.

Do not use the power cable to drag the device.

Allow the device to cool down sufficiently.

Storage

Before

 storing the device, proceed as follows:

Hold onto the mains plug while pulling the power cable out
of the mains socket.

Allow the device to cool down sufficiently.

When the device is not being used, observe the following
storage conditions:

dry and protected from frost and heat

in an upright position where it is protected from dust and
direct sunlight

with a cover to protect it from invasive dust, if necessary

Place no further devices or objects on top of the device to
prevent it from being damaged.

Remove batteries from the remote control.

Assembly and start-up

Scope of delivery

1 x Oil-filled radiator

2 x Mounting plate for castors

4 x Castor

4 x Cap nut

4 x Wing nut

2 x U-bolt

1 x Remote control

1 x Manual

Unpacking the device

1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power

cable is not damaged and that you do not damage it during
unwinding.

Assembly

Warning of electrical voltage

Risk of injury due to incorrect assembly!
Local or national regulations may apply for installation..
We recommend to have the installation carried out by a
qualified electrician.

Warning

Risk of fire due to improper installation!
There is a risk of fire if the required minimum
distances are not observed.
Observe the “Installation” section in the “Assembly and
start-up” chapter and the technical data in the
“Technical annex” chapter.

Summary of Contents for 1410000720















Reviews: