EN
7
oil-filled radiator TRH 25 E / TRH 26 E
Mounting the castors
1. Place the device upside down on a scratch-proof, even
surface and in a stable position.
2. Screw two of the castors and cap nuts to one of the
mounting plates in each case.
3. Detach the wing nuts from the U‑bolts.
4. Position the respective U‑bolt between either the first or
the last two ribs at the device bottom.
5. Attach the mounting plates with the castors to the U‑bolts.
In doing so, observe the position of the cut-outs at one
side of the mounting plates. They should be directed
towards the device front (control panel).
6. Bolt the mounting plates, wing nuts and U‑bolts together.
Ensure the tight fit of the mounting plates. They should
rest evenly on the ribs to ensure the upright position of the
device.
