P4
4
-
1
.
Lift fan assembly onto mounting bracket.
Mounting Bracket
4
-
2
.
Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
3
-
3
.
As shown above, insert yoke cover, deco ring,
canopy onto downrod.
3-3.Canopy
Yoke cover
Deco Ring
3
-
1
.
Remove cross pin and cotter pin from downrod.
3
-
2
.
Loosen 2 downrod jam screws at yoke.
Downrod Assembly
Fan Assembly
3
-
2
.
Downrod Jam
Screws (2)
(Loosening)
Wires
Cross Pin
3
-
1
.
Cotter Pin
Downrod Assembly
Yoke
Fan Assembly
Yoke cover
Downrod Jam
Screws (2)
(Tightening)
Canopy
Cotter Pin
Cross Pin
D
o
w
n
ro
d
A
s
s
e
m
b
ly
Yoke cover
3
-
5
.
Insert downrod assembly into yoke and attach the cross
pin through yoke & downrod, secure with cotter pin.
3
-
6
.
Tighten both downrod jam screws to
secure downrod.
3
-
7
.
Pull down the yoke cover to cover yoke.
3
-
4
.
Insert the lead wires through the downrod assembly.
Lead wires
Yoke
Fan Assembly
Fan Assembly
Ball Groove
Mounting
Bracket
Ridge
IMPORTANT Attaching safety cable to ceiling joist
Use wood screw, spring washer, and flat washer
from hardware bag. Pass wood screw through
closed loop of safety cable.
Secure wood screw
to ceiling joist through any available slot on
mounting bracket. Make sure safety cable
has been
tightened securely.
CAUTION: THE WOOD SCREW AND ITS
SUPPORT MUST BE ABLE TO FULLY
SUPPORT THE WEIGHT OF AT LEAST 100
LBS.
Safety Cable
Safety
cable
Flat Washer
Spring Washer
Wood Screw
Outlet Box
Canopy
Mounting Bracket
Safety Cable
3. DOWNROD INSTALLATION
4. HANGING THE FAN ONTO MOUNTING BRACKET
