OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box suitable
for fan support.
Outlet box must support 35 lbs min.
Note 1:
Note 2:
1. HANGING SYSTEM INSTALLATION
2. BLADE INSTALLATION
Fan Assembly
Blade(3)
Blade Screw(3)
P3
Styrofoam
Yoke
Flat Washer(3)
WARNING: BLADES SHOULD BE AT LEAST 7 FEET FROM FLOOR
Installing mounting bracket to ceiling outlet box
1-1. Outlet Box
Mounting
Bracket
Spring
Washer
Flat Washer
1-2. Screw (2)
(Loosening)
1-2. Loosen the screws at mounting bracket.
Do not remove.
1-1. Install mounting bracket to outlet box on
ceiling by using screws included with the outlet
box and washers from the hardware bag.
2-2. Attach blade to fan assembly by using flat
washers & blade screws provided from hardware bag.
(* Repeat until all 3 blades are installed firmly.)
*2-1. Use Styrofoam as cushion for this step.
*Place the fan assembly on Styrofoam with yoke up.
*Note: Make sure all blade washers & screws are tightened to avoid operating noise.
