9-4. TO
SET
UP REMOTE
FOR
#2 FAN
Disconnecting wire from #1 Fan
Disconnect the Black wires from #1 Fans and connect the Black wires back to #2 Fan that you remove from
9-3.
Make sure to turn off power at breaker box.
OF
F
OF
FO
FF
OFF
#2 Fan
is ready for setting
Turn on power at breaker box and #2 Fan is ready for setting.
OFF
OFF
OFF
ON
*See the remote control setting process for
9-1 to set up #2 Fan.
9
-
6.
Switch on the main power and now each of these two fans are operated by its own
remote individually.
OFF
OFF
OFF
ON
9-5. RECONNECT ALL FANS
After all the fans have done the resetting process, reconnect all the wires for #1 fan & #2 fan,
and lift up the Canopy of #1 fan & #2 fan.
(operating now)
(operating now)
NOTE:
For more than two fans, the same rules apply. Make sure only one fan at a time is
connected to power when doing the Remote Setting. Already completed fans should be
disconnected until all fans have completed the Remote Setting process.
P9
#1 Fan
Outlet Box
(Disconnecting)
Mounting Bracket
Outlet Box
Mounting Bracket
#2 Fan
Outlet Box
Mounting Bracket
#2 Fan
Outlet Box
Mounting Bracket
#1 Fan
Outlet Box
Outlet Box
#1 Fan
#2 Fan
Make sure to turn off power at breaker box.
OF
F
OF
FO
FF
OFF
