Pay attention
Please read this instruction carefully and follow the
safety instruction.
When the 3D printer is working, it will produce high temperature.Do not
touch working parts or extruder directly.After printing, the working part may
still be in the high temperature state.Please wait patiently for the working
parts and the print model to cool down before removing the model from the
print platform.
Please use the 3D printer in a spacious and well-ventilated
environment.
The recommended ambient temperature for 3D printers is
8°C-40°C, and the humidity is 20%-80%. Using outside this
range may bring bad printing effects.
In case of emergency, could turn off the power of the
3D printer directly.
3D printers contain working parts that move at high speeds,
so be wary of pinching your hands.
When removing the model from the print platform, be careful
not to swipe sharp objects at your finger.
Assemble the 3D printer or polish the model. suggest Wear
goggles.
Please pay attention to the protection of 3D printer
against rain and moisture.
Keep children away from the machine when it running
It is not recommended to run a 3D printer when left
unattended.
Use wires must be connected to the earth
Summary of Contents for X5SA-500-2E
Page 1: ......
Page 28: ...2 How to use slice software Type setting follow the steps below to complete the setting 24 ...
Page 32: ......
