Assembly material specification and quantity
：
basic frame
1pcs
Belt
2pcs
Ties
Step 5
：
Belts assembly
4-M3*3
8
Synchronous wheel
Synchronous wheel
Note: When the machine prints normally
after assembly.If the belt is too loud when
moving,The height of the left and right wheel
assembly can be adjusted by increasing and
reducing the gaskets.
During the printing process, the leather belt
has a slight sound, which is normal.
Left and right wheels
Belt tying diagram
X motor
Y motor
1.As shown in the figure, after
adjusting the distance between the
motor gear and the belt, lock the 2
rice screws on the gear.
2. Also assemble the second belt,
the tension of the second belt
should be equal.
Note: Synchronization wheels on X, Y axis motors
Height should be adjusted by itself.
Be sure to install the belt
Each belt is on the same planeUp.
Location of Print Head Band
Summary of Contents for X5SA-500-2E
Page 1: ......
Page 28: ...2 How to use slice software Type setting follow the steps below to complete the setting 24 ...
Page 32: ......
