TronicStar 10GPRO-V7-RX-R2
5
DESCRIPTION
ON/OFF VOLUME
on-off knob and demodulated audio
volume. Always keep it off when replacing battery,
avoiding irreparable damage to the detector by
reversing polarity. Use only alkaline batteries, as
ordinary batteries do not provide sufficient current.
BATTERY LEVEL
indicating 8 or 9 for new batteries and
1 for uncharged batteries.
BARGRAPH
signal indication system, it is made by bars,
16 lighted bars indicate the highest signal level, around
0dBm.
CLEAN TEST
keep this button pressed when turning the
detector on to enter clean test mode. In this state the
detector memorizes and always shows the largest
signal, remaining this state until the detector is turned
off. This mode is also used to find trackers and other
intermitent devices.
INT DETECT
while this key is pressed, the same function
described above is performed temporarily like in the
CLEAN TEST mode. Used for checking intermittent
devices that send only one pulse and can go unnoticed in
a conventional sweep. This is the temporary CLEAN
TEST mode.
BEEP ON/OFF
turns the beep on and off, when the beep
is on, the letter "B" appears in the display.
