TronicStar 10GPRO-V7-RX-R2
10
In analog mode
the LCD display preferably shows the
signals from devices such as analog eavesdropping and
analog wireless video cameras.
In digital mode,
the
display shows the signals of digital devices like GSM
bugs, trackers, cell phones, routers, WIFI cameras etc.
Hi power analog transmitters can interfere with digital
mode detection by having continuous carrier wave
overlapping the digital signals.
CONTINUOUS AND INSTANT MEMORY
By pressing and holding the "MEM" key, the signal
strength shown is frozen at the highest value and the
indication will only be updated if there is an even
stronger signal, the strongest signal will always be
displayed until we stop pressing the key.
In the CLN TEST mode (page 5), the strongest signal
sampling remains until the detector is turned off. This
mode is used for checking a safe room or for discovering
intermittent devices such as vehicle trackers.
We must use CLN TEST to know if the environment
remains clean. After scanning, even if considered safe
room, tests should be performed continuously, since spy
devices may be inert hidden in the room and at any time
start broadcasting. The detector must be continuously
on-site in CLN TEST mode to indicate if any wireless spy
device become active.
