Models: 02-1032C0111, 02A1032C0111, 02B1032C0111, 02C1032C0111,
02A1032C00150
10 Ton Single Stage Jack
02/2014 | Rev. 01
Page | 4
7.0
OPERATION
7.1
OPERATING PARAMETERS:
The user shall work in accordance with the Operator Manual.
It is not allowed to work under the raised load until it is secured by suitable means, i.e. Ram Locknut.
The employer of the operator shall provide for all necessary training and give information about pumping and translating
forces.
Operate between -20
C and 50
C/-4
F and 122
F.
7.2
NUMERICAL VALUES
Rated Capacity:
20,000 lbs (9,072 kg)
Minimum Closed Height:
30 in ( 76 cm)
Mechanical Extension:
12 in ( 30 cm)
Hydraulic Extension:
16 in ( 41 cm)
Maximum Height Obtainable: 60 in ( 152 cm)
Weight:
175 lbs ( 778 N)
Pressure Relief Setting:
2500 + 250/-0 PSIG ( 172 +17/-0 bar)
Noise level is 64 dB(A) at a distance of 120 in (3048 mm) at an inlet pressure of 100 psi (6.9 bar)
7.3
OPERATOR CONTROLS
See illustration
7.4
OPERATING INSTRUCTIONS
The user should be familiar with the following statements prior
to using the jack(s):
CAUTION!
1. Never put hands between the aircraft and
the jack pad; as after aircraft has been
lowered, struts may have hung up.
2. Never align jack under aircraft by pounding
on jack legs. Dented legs may lead to jack
collapse.
3. Always lower ram locking nut(s) after jack is
under load. Be sure ram nut(s) is seated
fully after jacking.
4. Always raise and lower jacks simultaneously
so that aircraft remains level.
5. Always use a tail or nose stand, as
applicable, for additional stability.
7.4.1
Rules For Operating
1. The user shall work in accordance with the Operator and/or Technical Manuals.
2. It is not allowed to work under the raised load until it is secured by suitable means, i.e. Ram Locknut.
3. The employer of the operator shall provide for all necessary training and give information about pumping and translating
forces.
4. Operate between -20
C and 50
C/-4
F and 122
F.
7.4 Operating instructions continued on following page.
FIGURE 7.3
– Operator Controls
Summary of Contents for 02-1032C0111
